Digital Timer ยี่ห้อ Omron รุ่น H5CZ-L8 (new)

Digital Timer ยี่ห้อ Omron

รุ่น H5CZ-L8

(new)

Number of Digits

4-digit

Release Voltage

10% of the supply voltage

Minimum Signal Input Time (sec)

1m/20m (collectively switching)

Power Supply Voltage (V)

AC100 to 240

Weight (g)

About 105 (body only)

Power Consumption

About 6.2VA

Character Height (mm)

(LCD) timing value: 10 setting: 6

Noise Immunity

Between power terminals: +/- 1.5kV between input terminals: square wave noise by +/- 600V noise simulator (pulse width 100ns/1micros, rising 1ns)

Storage Temperature (DegreeC)

-25 - +70 deg C (icing or no condensation)

Sensor Waiting Time

(During sensor waiting time and no input is accepted control output OFF) 250ms or less

Display Mode

Adding (UP) display and subtraction (DOWN) display (switching)

Mounting Method

Flush mounting, surface mounting (shared)

Caution

This product is manufactured in Japanese standards. Please check the specification before you order.

Insulation Resistance (Mohm)

(Non-current-carrying metal parts between the exposed conductive portion terminal, non-continuous contacts between) 100 or more (by DC500V mega)

Withstand Voltage

Power and AC2000V 50/60Hz 1min control output, input circuit between: input circuit between the AC2000V 50/60Hz 1min power: non-current-carrying metal parts between the current-carrying metal parts AC2000V 50/60Hz 1min non- Continuous contact between: AC1000V 50/60Hz 1min

Power Reset

(Except A-3, b-1, F, the ton-1, toff-1 mode) 0.5s: minimum power-supply cut-off time

Operating Time Variation

(In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-

Impulse Voltage(V)

Non-current-carrying metal parts between the exposed and 3.0k conductive part terminal:: 4.5k between power supply terminals

Voltage Influence

(In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-

Vibration Resistance

10 - 55Hz single amplitude 0.75mm 3 directions of the 2h

Power Failure Memory

More than 10 years: retention of data (100 000 times or more the number of rewriting times) EEP-ROM

Ambient Humidity

25 to 85%

Electrostatic Yield Strength

8kV (malfunction), 15kV (destruction)

One shot time

0.01 to 99.99s

Color

Front panel: Light gray (5Y7 / 1)

Input Signal

Signal, reset

Terminal Structure

Socket type (8-pin)

Set Error

(In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-

Operating Mode

A: Signal ON delay (I) A-1: Signal ON delay (II) A-2: Power ON Delay (I) A-3: Power ON-delay (II) b: flicker (I) b-1: flicker (II) d: Signal OFF-delay E: interval F: cumulative Z: ON / OFF duty vari

Time Base Range

9.999s (0.001s -), 99.99s (0.01s -), 999.9s (0.1s -), 9999s (1s -), 99min59s (1s -), 999.9min (0.1min -), 9999min (1min -), 99h59min (1min -), 999.9h (0.1h -), 9999h (1h -)

Control Output

(P level, reference value) DC5V 10mA: (cosphi = 1) minimum applicable load AC250/DC30V 5A resistive load

Allowable Voltage Range

85-110% of rated supply voltage

Effect of Temperature

(In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-

Protection Structure

IP66, UL508 Type 4X IEC standard (indoor), but only the panel surface (waterproof packing type Y92S-29 is used)

Reset Method

Power reset (by the output mode), external reset, manual reset, automatic reset (by the output mode)

Operating Ambient Temperature (deg C)

-10 - +55 deg C (when mounted side by side: -10 - +50 deg C) (icing or no condensation)

Lifespan

(AC250V 5A resistive load, 1800 times / h, ambient temperature conditions more than 100,000 times: electrical and mechanical:: (23 deg C 1800 times / h time no load, a switching frequency, ambient temperature conditions) 10 million times or more : 23 deg C)

Output Type

Contact output (time limit 1c)

Input Method

100kohm impedance: when opened 3V following: short-circuit residual voltage (about 12mA current flow when 0ohm) 1kohm following: No-voltage input impedance short-circuit

Vibration Resistance (malfunction)

10 - 55Hz single amplitude 0.35mm 3 directions of the 10min

Impact Resistance (Malfunction)

3 times each in 100m / s ^{2 3 axis each direction}

Impact Resistance

3 times each in 300m / s ^{2 3 axis each direction}