Photo Sensor ยี่ห้อOMRON รุ่นE3G-R13
ระยะตรวจจับสูงสุด 2 เมตร
Brown : 10 to 30VDC / Blue : 0V / Black : output
LII
|
Sensing method |
Retro-reflective with M.S.R. function |
|
Sensing distance |
0.5 m to 10 m (When using the E39-R2) |
|
Standard sensing object |
Opaque: 80 mm dia. Min. |
|
Directional angle |
Sensor:1 to 5 DEG
Reflector:40 DEG Min. |
|
Light source |
Red LED (700nm) |
|
Power supply voltage |
10 to 30 VDC (ripple(p-p) 10% included) |
|
Current consumption |
50mA DC Max. |
|
Control output (Output type) |
NPN/PNP open collector output |
|
Control output (Load current) |
0 to 100 mA |
|
Control output (Residual voltage) |
(DC) 1.2 V Max. (NPN output, Load current 100mA Max.)
(DC) 2 V Max. (PNP output, Load current 100mA Max.) |
|
Operation mode |
Light-ON/Dark-ON selectable |
|
Load power supply voltage |
30 VDC Max. |
|
Protective circuit |
Surge suppressor
Output short-cut protection
Power supply reverce polarity protection
Mutual interference prevention |
|
Response time |
1 ms Max. |
|
Sensitivity setting |
Single-turn adjustment |
|
Ambient illuminance |
Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max. |
|
Ambient temperature |
Operating: -25 to 55 CEL
Storage: -30 to 70 CEL
(with no icing or condensation) |
|
Ambient humidity |
Operating: 35 to 85 %RH
Storage: 35 to 95 %RH
(with no condensation) |
|
Insulation resistance |
20 M OHM Min. at 500 VDC between charged parts and the case |
|
Dielectric strength |
1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
|
Vibration resistance |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
|
Shock resistance |
500m/s2 for 3 times each in X, Y, and Z directions |
|
Degree of protection |
IEC60529: IP67 |
|
Applicable standard (EC Directive (Low Voltage Directive)) |
EN60947-5-2 |
|
Applicable standard (EC Directive (EMC Directive)) |
EMI: EN60947-5-2
Emission Enclosure: EN55011 Group 1 classA
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
CE marking: Equipped |
|
Connection method |
Pre-wired models (Cable length: 2 m) |
|
Indicator |
Operation indicator(orange), Stability indicator(green) |
|
Weight (packed state) |
approx. 150 g |
|
Tightening torque |
1.2 N.m Max. (with M4 screw) |
|
Material (case) |
PBT |
|
Material (lens) |
Methacylate resin |
|
Material (cover) |
Polyethyl sulfon |
|
Accessories |
Instruction manual, Adjustment driver, Reflector |
